Description
2:1 ratio (Mixing ratio by volume) – 1.5 Litre size (1 Litre part A and 500ml part B)
Designed to cast between 25-55mm.
Its NOT suitable for casting small pieces, coating or shallow pours under 20mm otherwise curing will be very slow.
It is designed to cast large projects such as river tables in one pour up to 55mm.
For large pyramids or similar to that size, can go up to 100mm in one pour.
Directions for use:
Mix resin and hardener in exactly 2:1 ratio by volume ( 2 parts A and 1 part B).
Using a plastic or silicone container for mixing and mix thoroughly, scrape sides and bottom of container to fully integrate products.
Please use a mixing container that is clean and free of contamination.
Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix or mixtures will turn milky colour.
Once the product is poured into the mould, let the resin settle allowing air bubbles or foam to float to the surface.
Most bubbles will float to the surface and burst themselves.Any remaining bubbles or foam can be removed with a heat gun or Blow torch.
Sweep the heat gun continuously across the surface for a few seconds and avoid overheating in one spot .
Curing would take 3 days plus.
Eparency SuperDeep Casting Resin is a 2 part (2 parts A and 1 part B) Very Slow Curing Epoxy resin which when mixed with hardener is poured into a mould and sets to a strong, hard finished product.
Eparency is resistant to most household chemicals and can withstand surface temperatures around 80-85oC (resisting marks from hot drinks etc).
The special SuperDeep casting character allows this product to do deep casting up to 55mm in large quantities without generating exothermic heat.
Features of Eparency SuperDeep Casting Epoxy Resin:
- No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05
- Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more
- UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light
- Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness
- Superior Air Release: Some epoxies may bubble, fish eye or crater. Our formula features superior air release, minimizing these concerns
- Impact Resistant: Cures super strong, leaving a smooth impact resistant surface
- Minimal odour and NOT AT ALL yellowing after long period of time.
- Easy To Use: 2 to 1 by volume mix ratio
Following factors affect the curing time:
Mixing quantity: The more you mix, the fast it cures and vice versa.
Room Temperature: Higher room temperature will speed up the curing.
Application temperature: Wide temperature range through summer to winter
Pot life: 3-4 hours (Data based on 500ml mixing; 40mm pour depth; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.
Time to reach non-tacky: 15-25 hours Depending on the room temperature (Data based on 500ml mixing; 40mm pour depth)
Time to reach full cure: 72 hours (Data based on 500ml mixing; 40mm pour depth)
Shore D Hardness: 85
Viscosity: 600 cps for Part A (Brookfield 20 rpm) 250 cps for Part B (Brookfield 20 rpm)
Clarity: Pt-Co value < 10 for both Part A and Part B
Compatibility: Binding to metal, inorganic materials including cement; stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.
Shelf life: 12 months
Eparancy Resin are 100% MADE IN AUSTRALIA – NOT overseas products getting relabelled and filled in Australia. Manufacturerd here in Australia.
CAUTION: All epoxy share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN.
Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.
