Description
2:1 ratio (Mixing ratio by volume) – 1500ml size (1000ml Part A and 500ml Part B)
Can be used to cast anything, from small jewellery to deep casting river tables.
Each pour should not exceed 20mm depth for river table size, and not exceed 50mm depth for smaller casting such as pyramids etc.
It can also be used for coating, however not suitable for making beach scenes coating, waves, cells or other effects due to its low viscosity nature.
Small items would cure slower (approx. 3 days) and bigger items would cure slightly faster. If intending to have a fast curing process, Eparency Ultra Clear Fast Curing Epoxy Resin would be more suitable.
Directions for use:
Mix resin and hardener in exactly 2:1 ratio by volume ( 2 parts A and 1 part B).
Using a plastic or silicone container for mixing and mix thoroughly, scrape sides and bottom of container to fully integrate products.
Please use a mixing container that is clean and free of contamination.
Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix or mixtures will turn milky colour.
Once the product is poured into the mould, let the resin settle allowing air bubbles or foam to float to the surface.
Most bubbles will float to the surface and burst themselves.
Any remaining bubbles or foam can be removed with a heat gun or Blow torch.
Features of Eparency Ultra Clear Premium All Purpose Epoxy Resin:
- No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05
- Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find.
- UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light
- Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness
- Superior Air Release: Some epoxies may bubble, fish eye or crater. Our formula features superior air release, minimizing these concerns
- Impact Resistant: Cures super strong, leaving a smooth impact resistant surface.
- Minimal odour and NOT AT ALL yellowing after long period of time.
- Easy To Use: 2 to 1 by volume mix ratio
Suited to use for:
- Boat manufacture and Fibreglass repairs – it has superior strength, good cures times, fast wet out of Fibreglass and other composite reinforcements and can be even be applied over most other brands of cured epoxies. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special type for Epoxy Resin which is available from us), carbon fibre or kevlar, as well as used over urethane foams and other sandwich core materials.
- Ideal for gloss coating of timber furniture or bench tops and casting items into furniture – The resin has great durability and can be resurfaced should it be damaged in any way. It has a bloom free finish.
- Great for the hobbyist when making Jewellery or items that require a crystal clear resin that possesses Superior durability.
- ARTWORK – absolutely ideal for this type of work
- Surfers, Surfboard repairers/manufacturer’s appreciate the UV resistance added to this specially formulated resin.
- Ultra/Crystal Clear Epoxy Resin is ideal for floor coating applications as it is an extremely durable and tough product offering a high gloss finish with minimal coats.
Coverage depends on temperature (Epoxy resins before mixing act a little like honey – in summer, they are very runny while in winter they are very stiff) and so coverage can vary up from 250 grams per square meter per coat. Eparency is a 2 part (2 parts A and 1 part B) Slow Curing Epoxy resin which when mixed with hardener is poured into a mould and sets to a strong, hard finished product. Eparency is resistant to most household chemicals and can withstand surface temperatures around 80-85oC (resisting marks from hot drinks etc). The special slow curing character allows this product to do deep casting in large quantities without generating exothermic heat. This product can be used for outdoor use.
Following factors affect the curing time:
Mixing quantity: The more you mix, the fast it cures and vice versa.
Room Temperature: Higher room temperature will speed up the curing.
Pot life: 2-4 hours (Data based on 100ml mixing; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.
Time to reach non-tacky: 10-30 hours Depending on the room temperature (Data based on 100ml mixing)
Time to reach full cure: 48 hours (Data based on 100ml mixing)
Shore D Hardness: 85
Viscosity: 600 cps for Part A (Brookfield 20 rpm) 450 cps for Part B (Brookfield 20 rpm)
Clarity: Pt-Co value < 10 for both Part A and Part B
Compatibility: Binding to metal, inorganic materials including cement; stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.
Shelf life: 6 months
Eparancy Resin are 100% MADE IN AUSTRALIA – NOT overseas products getting relabelled and filled in Australia. Manufacturerd here in Australia.
CAUTION: All epoxy share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN.
Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.
